For applications that require a bit of clout, why not choose the NEW Paslode IM45 CW Clout Nailer system?
The IM45 CW is designed to fire clout nails into a wide range of substrate including flat roof membrane, Bitumen shingles and roofing felt, but can also be used wherever there’s a need to fix standard clout nails, making the tool a great on-site all-rounder.
As a complete system, the IM45 CW Clout Nailer provides time and cost saving implications. There’s no more handling of fiddly individual nails with a coil holding a maximum capacity of 125 nails. Simply load the tool and go, saving valuable reloading time and wastage from dropping loose nails.
Firing the nails from the tool is also SIX TIMES FASTER than traditional methods, making laborious hand hammering a thing of the past. Get the job done quicker so that you can move on to the next.
The clout nails come in a smooth hot-dipped galv finish (service class 3) and in lengths of 19mm, 22mm, 25mm and 35mm. The IM45 CW Clout Nailer can be used with our standard high-performance Paslode lithium battery.
The tool itself benefits from all the quality and reliability you’d associate with Paslode. With an optimum 30 joules of fire power you can be sure of a clean, flush finish every time. The tool has also been designed with useability in mind – with an engineered rubber nose piece to prevent slipping and material damage you can be sure of the highest quality fixing every time.
To find out more about the IM45 CW Clout Nailer visit https://paslodeuknordics.ac-page.com/im45-cw-uk-launch
![](https://masterroofers.co.uk/wp-content/uploads/2024/07/018116-IM45-CW-PASLODE_IMG_03-1024x577.jpg)
![](https://masterroofers.co.uk/wp-content/uploads/2024/07/018116-IM45-CW-PASLODE_IMG_04-1024x577.jpg)
![](https://masterroofers.co.uk/wp-content/uploads/2024/07/018116-IM45-CW-PASLODE_IMG_12-1024x577.jpg)